Qualitative Face Fit Testing
We understand the current challenges all our clients are facing. We have put together a package for Face Fit Qualitative Testing to ensure you have the confidence you are meeting your staff protection needs and patients needs with dental treatments and medical emergencies with-in the dental practice that may occur.
New times and new challenges are ahead. Our team have been in training and now qualified to carry out qualitative testing for your dental team staff.
We are now able to offer you Qualitative Fit Face Testing. This will enable dental practices to meet the standards of the HSE, COSHH and UK resuscitation medical emergencies guidelines when dealing with a medical emergencies with-in the dental practice.
Testing of your staff can be carried out at your practice at a time that fits in with your schedule by our qualified front line medical staff. We can even arrange for your yearly CPD medical emergency training and Face Fit Testing to happen on the same day as one package.
This will ensure you are meeting all your COSHH, HSE requirements for AFFP treatments and medical emergencies with in the dental practice.
Our Fit Testing Training team have a wealth of practical experience of face fit testing. This makes a difference to the quality of testing and providing practical guidance, advice and helpful hints and tips all gained from a working practical knowledge in frontline emergency work and providing qualitative face fit testing. We work with every make and model of mask from FFP1, FFP2 & FFP3 disposable masks through to semi-disposable and reusable half masks.
We provide Qualitative Fit testing (QLFT)
We conduct of face fit testing, qualitative testing that results in matching an individual’s face shape with a compatible mask to ensure a tight seal is achieved. All our staff are fully trained, qualified and compliant to the HSE Guidelines.
Used only for disposable and half face masks.
The individual wears a hood over the head and shoulders and the tester sprays a bitter solution into the hood.
The wearer carries out a series of exercises, such as turning the head from side to side.
If the individual can taste the solution, there is a break in the mask’s seal.
Qualitative fit testing (QLFT) is a pass/fail test based on the wearer’s subjective assessment of any leakage through the face seal region by detecting the introduction of bitter- or sweet-tasting aerosol as a test agent. QLFT methods are suitable for disposable and reusable half masks; they are not suitable for full-face masks. Although this type of test is based on subjective detection and response by the wearer of the RPE, it is important that it is administered by a fit tester competent in using this method.
A face fit test is a simple 20 minute test. Ideally face fit testing should be carried out at mask selection stage, so employers can ensure the correct mask models and sizes can be purchased. Repeat face fit testing should also be carried out on a regular basis (typically every one, two or three years depending on risk) or if the wearer loses or gains weight, has significant dental work, or gains scars, moles or other facial features where the mask seal meets the face.
What does the test involve:
Face fit is a series of tests and exercises emulating a full range of facial movement to ensure an adequate seal is maintained. The test is laid out as such:
Head side to side
Head up and down
Talk out loud (reading a passage of text)
All exercises (except bending over) are carried out while stepping on and off a low step.
All exercises must be passed.
How to prepare for your face fit test:
Several things could affect the results of your face fit test, due to the accuracy of the equipment. These include, but are not limited to:
Facial hair (see below)
Long hair (will need to be tied back)
It is also recommended that you do not smoke, eat or drink for at least 1 hour prior to the test.
Facial hair, stubble and beards make it extremely difficult to get a good seal. If there are good reasons for having a beard (ie, for religious reasons) alternative forms of RPE, that do not rely on a tight fit to the face are available: ie full hooded masks.
Medical Emergencies with-in the dental practice.
We are a specialist training provider in Medical Emergencies with-in the dental practice, Core CPD.
As part of this Service we shall review your medical response kit and advise on all current PPE that will be needed to ensure you are up to date and current with the UK guidelines when dealing with a patient taken ill in your practice.
On-site Fit face Testing at your location to fit in with your schedule.
1- 5 staff £285*
6 - 8 staff £305
9 -11 staff £355
12 -14 staff £405
15 -20 staff £495
21 -25 staff £555
*Minimum charge payable.
PLEASE NOTE THE AB0VE COSTINGS ARE FOR THE SUSSEX AREA. PLEASE CONTACT US FOR A QUOTE OUTSIDE THE SUSSEX AREA.
NB: Additional costs (potential depending on location) – accommodation and mileage
If you are attending one of our Sussex First Aid Training Courses Medical Emergencies in the Dental Practices courses – for convenience, we may be able to complete your face fit test during the duration of your course, if time allows. Remember to discuss this option at the time of booking.
Our Fit Testing is fully compliant with the HSE guidelines.
Our staff are fully trained in qualitative face fit testing in accordance with current Regulations and Approved Codes of Practice and HSE Guidelines.